No Hot Water? Common Causes & Tips to Deal with Yourself
No Hot Water? Common Causes & Tips to Deal with Yourself
Blog Article
What're your thoughts on What Would Cause My Electric Water Heater to Stop Working??
Lots of contemporary houses make use of an electrical water heater for their heating system, as a result of its benefit and also simplicity of use. However, similar to any other electric appliances, troubles might occur with its use, suddenly. It can be really frustrating to get up to a cold shower as opposed to a hot one or having your bathroom with water that isn't warm enough and even too warm. Whatever the instance might be, hot water heater problems can be fairly nerve-racking. The good news is, we've made a checklist of possible remedies to your water heater concerns. There are a number of variables that might create much of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the major power supply for security. Whatever the trouble is, getting it fixed must not posture excessive of a concern if you follow these actions:
Call An Expert:
If after changing all faulty components as well as resetting your temperature level, the water heater still isn't functioning, you might require to contact a professional plumber for a specialist viewpoint. The trouble with your heater could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of hot water needed in your home. Whatever the instance may be, an expert plumber would certainly aid resolve the issue.
Examine Your Power Supply:
As standard as this may seem, it is really necessary. Without sufficient power, your water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, simply turn it on and off once more. Replace any kind of busted or damaged fuse. Test the home appliance with power after these modifications to see if it's currently functioning.
Examine Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot enough, you may require to examine the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset over the thermostat. This need to help heat up the water. Turn the circuit breaker back on as well as inspect if the issue has actually been settled.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, after that try taking a look at your heating element if it is still working. Check each of your heating elements to make sure the issue isn't with any of them. If any of them is defective, replace that part and then check whether the hot water is back on.
Verdict
Hot water heater troubles are not constantly significant. Much of them are because of minor problems like a blown fuse or worn-out heating element. Replacing the faulty components need to suffice. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our section on No Hot Water — Water Heater Repair. Thanks a lot for finding the time to browse our blog. Sharing is nice. Helping others is fun. I am grateful for your time. Kindly come by our site back soon.
Get A Quote
Report this page